|
A grinding machine uses an abrasive wheel to final machine precision components to fine tolerances ,it is possible to achieve accuracy down to less than .001mm.There are 3 general types of grinding machine,Internal which machines bores,external which grinds outside diameters.and surface which grinds flat surfaces on components.There are other types of specialized grinding machine like gear/spline grinders etc .
Adopting advanced structure of the similar products in foreign countries, the High-rate Raymond mill is designated on the basis of modification and renovation of large scale Raymond mills. Compared with ball mills, the High-rate Raymond mill has higher efficiency,Wholesale Jerseys Free Shipping, lower power consumption, and smaller area occupying and smaller lump-sum investment. Due to the centrifugal force, the roller mills grind tightly on the rings. Thus it will not influence the output and granularity of the finished products even when the roller and the ring have wear-out in some degree.
It is designated for processing superfine powder of over 300 noninflammable and nonexplosive materials with Mohs hardness below Grade 8 and water content below 6% in the field of mine ,chemical industry, building materials, such as barite, calcite, potash feldspar, steatite, marble, limestone, dolomite, fluorite, lime, active carclazyte,Wholesale Jerseys, active carbon, bentonite, kaolin, cement, phosphorus ore, gypsum, glass, manganese ore,Cheap NFL Jerseys China, titanium ore, copper mine, chrome ore, refractory materials, heat preservation materials, coal coke, coal fines, black,NFL Jerseys Supply, , bone meal, titanium white powder, ,quartz, and so on. The finished products can be adjusted freely from 80 to 325 meshes with max meshes of 600 for some materials.
After many years of practice and improvement, Raymond mill structure is getting perfect day by day. For low consumption,Cheap Jerseys Supply, low investment, environment friendly , small occupation area, and more efficient than the traditional mill, it is widely used in the field of metallurgy, building materials, chemical industry and mining to process powder. The raymond mill is used in grinding the non-flammable and non-explosive stuff which has the Moh’s hardness below 7,China Cheap Jerseys, humidity less than 6%, such as gypsum, talc, calcite, limestone, marble,Cheap NFL Jerseys Supply, feldspar, barite, dolomite, granite, kaolin, bentonite, bauxite, iron ore etc., the final products change from 613 micron to 44 micron. Through the function of separator and blower, raymond mill can meet different customers’ demand. raw material mill:hxjq-millproducts/cement_mill.html
portable crusher:hxjqchinaproduct-list_21.html
Structure of Raymond mill:
1.The whole plant is a vertical structure of strong systematic characteristic, so it occupies small area. From crushing of raw material to grinding and packing is an independent production system.
2.Compared with other milling plants, its passing ratio achieves 99%, this is what other mill can not reach;
3.Driving system of main frame adopts airtight gearing and pulley, drives smoothly and operates reliably.
4.Main parts of the whole plant are made from cast and steel of high quality. The techniques is so subtly that insures the durability of whole plant,
5.The electric control system is centralized controlled, so the automaticity is high, no people are needed in the operating room.
Raymond Mill Maintaince:
1. Prior to installation of the equipment, all the people who will be assigned to operate the equipment have to be technically trained to know the principle and rules of operation. Someone should be specially selected and put in charge of the operation.
2. To ensure normal operation of the equipment, a manual containing strict rules and procedures for its operation, maintenance and repair should be well prepared and followed. Tools,Cheap Jerseys From China, replacement parts for maintaining, repairing and lubricating oil and grease must be available for immediate use.
3. After a period of usage, the equipment should be checked, to replace worn-and-torn parts such as rollers, rings and shovels. Be sure to fasten connecting-bolts, nut collars to fix rollers properly. Be sure to lubricate the parts sufficiently.
4. Roller should be replaced after 500-hours use. To check bearing in them and replace broken ones, and then fill enough oil and grease (with oil-pump or grease-gun).
As the professional manufacturer of complete sets of mining machinery, such as rotary kiln, Henan Hongxing is always doing the best in products and service. |
|