|
The jaw crusher would not be damaged even when there are unbreakable stones mixed in the materials. The vibrating Jaw crusher is equipped with a movable plate with high impacting speed that is driven by inertia. As the locations of the two movable plates bear no restrictions in kinematic parameters,Wholesale Los Angeles Lakers Jerseys, the unbreakable materials in the chamber will be automatically discharged by the crusher. In the process, you don’t have to turn off the equipment. There will be no damage to the crusher, and the only thing that is likely to be affected is the discharging granularity when discharging these unbreakable materials.
The vibrating jaw crusher could start and stop when loaded. It could also operate when overloaded. The motor of the vibrating Jaw crusher is designed to directly drive the eccentric weight. Therefore, the motor could be turned on only by overcoming the static torque imbalance of the eccentric weight as materials inside the crushing chamber have no influence on the static torque of the eccentric weight. For Jaw crushers with traditional kinematic trajectories, they must be turned on when they have no load, thus reducing the impact of load inside the chamber on the crusher’s kinematic trajectories. By doing so, it will be easier to turn on the crusher. The vibrating Jaw crusher could move when it’s loaded. Therefore, to stop the crusher when it’s loaded or not bears no distinction. For the same reason,Wholesale Houston Astros Jerseys, the amount and strength of materials inside the chamber or whether they can be crushed or not have no influence on the operation of the motor in driving the eccentric weight.
The force of the vibrating Jaw crusher is a kind of impact force. For this reason, the crusher will exert a strong gradient force against the materials, which is swift and impulsive. Compared with materials processed by the impact crusher or hammer crusher,Wholesale Jerseys, those in the vibrating Jaw crusher are not crushed when they are free falling, but rather when they are between the plate and the heavy frame. It’s like a hammer is hitting materials on the anvil.
rotary kiln : ore-millsrotary-kiln.html |
|