Cheap Jerseys NFL ktcygac5

micevan1l6

The problems needs noticing before the starting up of high-frequency vibrating screen:
1. Before starting up, checking to make sure that there is no other things in the crusher,Cheap Jerseys From China, if something were found, clean it up timely.
2. Checking whether the screws are loose or not.
3. Making sure that the power supply and the motor are normal.
4. The vibrating screen cannot be started until everything is in normal condition after examination.
Matters needing attention :
1. It is necessary to observe the condition of materials constantly. If the phenomenon of caking, long strips and color change emerged, isolation must be conducted and working out solutions.
2. If there were something wrong with the discharging, promptly seeking solutions.
The problems needs noticing after the stop of high-frequency vibrating screen:
1. Stopping the machine in strict accordance with the correct process.
2. Cleaning up residual material in the machine.
3. Restoring the normal operating state of the machine.
4. The surrounding environment of the vibrating screen must be clean and keeping the equipment clean.
5. The things that have nothing to do with the production should not be placed in the site.
In the use of high-frequency vibrating screen, there are two requirements: the first is to make sure its large processing capacity; the other is to sieve the fine material whose granularity is smaller than the mesh to the products pile under the vibrating screen as much as possible. Therefore, the sieve has two important process indicators: one is its processing ability, namely, the tons of the processing materials per hour per square meter,Cheap NFL Jerseys, which is the quantity index of the screening operation. Another is screening efficiency,Avalanche #9 Matt Duchene Black 2016 All Star Stitched NHL Jersey, it is the quality indicators.
In the screening process, all the fine level of materials that are smaller than the mesh should have been sieved through the mesh, but actually it is not the case. It is based on the performance and operation of the screening equipment as well as the moisture content and clay content of materials. Therefore, there are always some fine levels of particles that cannot pass through the sieve and they are discharged with the oversize. The larger the number of the fine materials among the oversize is, the worse the screening effect is. In order to quantitatively assess the full extent of the screening, the index of screening efficiency will be used.